USB Cable Extender

How to make USB Cable Length

Our discussion this time is about How to Make a USB Cable 10 Meters. Maybe you've had, at the time of the flash or modem connects to a USB extension cable (USB Extender) turns the device is not recognized by your computer, even though the flash, modem and port USBnya work well. Why did this happen?

It does not recognize the flash, modem or other USB devices when you connect with a USB extension cable (USB Extender) is caused by the quality of the USB cable extender so poor that resulted in a decline in the current USB device we can not work perfectly. As a result, we become a USB device can not be recognized (the USB can not Recognized)

USB cable extender 10 meter manufacturer is not necessarily good quality and not necessarily suitable for our USB devices. In the price of a USB cable extender 10 meter are also fairly expensive at 100 thousand more. Small diameter copper and poor quality caused grounding USB cable extender sold in the market are less able to mendriver modem in a distance of more than 1 meter or the modem will not be recognized.

How to cope:

This problem can be overcome by making your own USB cable extender using a quality BELDEN UTP cable (LAN cable / network). UTP cable has a copper core diameter larger than the regular USB cable extender, and a better quality of copper. This is because the UTP cable is used to send data with a small loss, so that we can make these advantages as a tool to make USB extender cable of good quality.

How to Make a USB Cable Extender 10-15 Meters.

We need to know first, ordinary USB cable extender consists of four wires, namely:

• red: 5 volts dc
• Green: Data +
• White: data -
• Black: ground.

While the UTP cable / LAN cable consists of 8 are:

• orange,
• white-orange, 
• green, 
• white-green, 
• blue, 
• blue and white, 
• chocolate
• white chocolate.

Tools and Materials Preparation USB Cable Extender 10 Meters:

1. USB extender cable 1 Meter usual we've cut at both ends of the plug. Plugs this is what we use. 
2. Belden UTP Cable KW 1: maximum 15 Meters 10 Meters.
3. Tenol / lead for connecting cables.
4. Solder, scissors, cutter, and isolation.

Here's a USB cable extender configuration of UTP cable:

• UTP cable combined orange and white orange and red wires connected with a USB extender.
• Green UTP cable is connected with a USB cable extender green.
• UTP cable is connected with a green-white white-USB cable extender.
• UTP cable and connected all the rest combined with black USB cable extender. By enlarging the ground, then the possibility of loss (loss of) the current is very small.

When finished, trim the cord connection with the isolation and USB cable extender 10-15 Meter is ready for use.